Found a bad clamp on Upper Radiator hose by t-stat housing. We need to replace it by doing a drain and fill of the system the way the clamp is positioned on hose.
Inspect hoses and clamps. Pressure test cooling system. Flush engine, radiator, and heater core in both directions. Bring antifreeze to -35 degrees. PH balance coolant to between 9.8 to 10.5. Check thermostat and electric cooling fan operation. Chec
Change Motor Oil and Replaced Filter, Lube Chassis, Check And Top Off All fluid levels Levels
Rotate Tires
WATER OUTLET – Remove and Replace – 1.4L Eng,Turbocharger
Road test vehicle. Check all suspension and steering parts for wear. Check tire pressure and condition. Check riding height. Check alignment of 2 wheels.Provide printout of results to customer. Advise of needed repair
TIE ROD END – Remove and Replace – Outer,One Side – [Includes: Steering Angle Sensor Centering procedure.] – NOTE: Manufacturer recommends removal of Rack and Pinion Steering Gea
Steve D. gave our service a 5 star review on 11/24/2017